Cladding products right across the board(ing)
July 7th, 2016
Share
Email
ShareAny external material is vulnerable to the elements, over time outside exposure can allow deterioration, so needs a system which not only protects but also provides a great finish. Brewers have an extensive range of products for exterior protection both for homes and industrial properties.
External cladding can be made from different
materials, from steel and non-ferrous metals to wood, fibreglass and concrete.
Choosing the right product for the job is important, aspects such as UV
protection and limiting general grime build up should also be considered. So Brewers sweep the board(ing) with products
to help you achieve the best result, as the correct coating system will ensure maximum
lifespan and help with maintenance and appearance.
Cladshield from Dulux Trade offers exterior durability and protection for Plastisol coated and coil cladded buildings.
Cladshield is a water-based coating which creates a tough and durable paint film suitable for application over previously painted and weathered cladding.
Tintable in a vast range of colours, Cladshield offers 8 years protection to keep the elements at bay.
Crown Trade Protective Coatings Fast Drying Cladding Finish has been specially developed for the refurbishment of pre-coated weathered metal cladding, enabling the cladding to be restored to pristine condition.
Being water-based Crown Trade Protective Coatings Fast Drying Cladding Finish has a quick drying time and also incorporates anti-mould properties into its satin finish.
Bradite have developed Cladit, a water thinned polyurethane acrylic finish and coating, for long lasting protection of exterior cladding on buildings and structures.
A hard wearing and flexible film, Cladit has good colour retention with the added protection of weather and UV resistance. Surface dry in just one hour, Cladit offers up to 9 square metres coverage per litre and can be easily over-coated after 4 hours.
With a semi-gloss finish Cladit from Bradite offers superior protection on most external cladding substrates.
Rust-Oleum Mathys Metal Cladding Topcoat offers a durable finish to metal cladding which has already been primed.
With a decorative satin gloss finish the single pack water-based topcoat has excellent UV resistance, touch dry in 1 hour, recoatable after 8 and full hardness achieved after 2 days.
Your local Brewers branch can offer advice on the preparation and application of cladding systems, with the expert knowledge to help get the best results from the job.
